Yeah, same. Much more pleasant on the eye

Those fucks would unplug the entire damn internet in their crusade if they had the ability to

Thank you for the answer! I will likely stick with qBittorrent and wait until it receives support. It works well enough as-is, anyways

Postman has a quite active community, you can find a lot of stuff there already. It’s not quite on the level of clearnet torrenting yet, of course, but it can very much stand on its own

It functions without port forwarding, but it’s much better with. While I can’t speak for the Java client, i2pd has support for UPnP, which might make things easier in some environments. You also don’t need a VPN for I2P, since the network takes care of the anonymising

Following Empress’ bullshit via Telegram screenshots is a fun experience. I like to think of it as the B-plot of digital piracy.

Stormy is an understatement. Last I checked, I was sitting at 4% - though it bears noting that I’m running my I2P router on a Pi, so I2PD is a bit out of date for me

Correct on all counts. I’ll try some other DNS servers later. Right now I’m using the Mullvad DNS servers, any suggestions for ones that support DNS over TLS?

Some further tests make it look like dig is influenced by some caching stuff going on on my PC. I figured that out while playing around with a TXT record for testing purposes, and noticing that host and dig return different results for the same input.

Running the commands again on my phone using Termux reveals that the AAAA record is in place and functioning, but I still can’t reach the website from my browser by using the domain name.

~ $ dig [domain]

; <<>> DiG 9.16.41 <<>> [domain]
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 39355
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;[domain].              IN      A

;; AUTHORITY SECTION:
[domain].       1800    IN      SOA     dns1.registrar-servers.com. hostmaster.registrar-servers.com. 1711402015 43200 3600 604800 3601

;; Query time: 30 msec
;; SERVER: 8.8.8.8#53(8.8.8.8)
;; WHEN: Mon Mar 25 22:35:59 CET 2024
;; MSG SIZE  rcvd: 118

~ $ dig [domain] AAAA

; <<>> DiG 9.16.41 <<>> [domain] AAAA
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45166
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;[domain].              IN      AAAA

;; ANSWER SECTION:
[domain].       1799    IN      AAAA    [correct IP!]

;; Query time: 36 msec
;; SERVER: 8.8.8.8#53(8.8.8.8)
;; WHEN: Mon Mar 25 22:36:11 CET 2024
;; MSG SIZE  rcvd: 73

~ $ host -t AAAA [domain]
[domain] has IPv6 address [correct IP!]
~ $

Thanks for the answer! Unfortunately, the response from dig AAAA is rather lackluster:

; <<>> DiG 9.18.24 <<>> AAAA [domain]
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 14166
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;[domain].              IN      AAAA

;; Query time: 19 msec
;; SERVER: 192.168.178.1#53(192.168.178.1) (UDP)
;; WHEN: Mon Mar 25 19:22:18 CET 2024
;; MSG SIZE  rcvd: 34

I’m starting to suspect Namecheap just hates IPv6. Their dynamic DNS service only covers v4, too

Correct! Single AAAA record pointing to the IP of my server, which I verified beforehand.

My host records consist of a single AAAA record that points to the IP address of my server, which I verified beforehand. I’ve tried dig, but I’m not sure how to interpret it’s output, which looks as follows:

;; Warning: Client COOKIE mismatch

; <<>> DiG 9.18.24 <<>> [domain]
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 35067
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 1232
; COOKIE: 485ffdde4d749cd80100000066019ef6aba1fc1942596e31 (bad)
;; QUESTION SECTION:
;[domain].              IN      A

;; AUTHORITY SECTION:
[domain].       3113    IN      SOA     dns1.registrar-servers.com. hostmaster.registrar-servers.com. 1711343555 43200 3600 604800 3601

;; Query time: 0 msec
;; SERVER: 192.168.178.1#53(192.168.178.1) (UDP)
;; WHEN: Mon Mar 25 17:05:52 CET 2024
;; MSG SIZE  rcvd: 146

The DNS issue persists. The part that my friend helped me with was determining if I configured my router firewall correctly, which I did. Currently I can reach my server from the internet only directly via its IPv6 address, with no progress on binding it to my domain name.

The firewall port on my router is open, and as far as I can tell, my server isn’t running a firewall at the moment. ICMP might be a problem; ipv6-test tells me that those are filtered out. After checking my router settings, I’ve determined that ICMP is enabled for the device in question.

Tried my mobile connection already, doesn’t have IPv6. Also tried a nearby hotspot, same issue.

YouTube is already a sedated, anaemic whale of a website. Adblock probably makes it run faster, given it usually removes stuff rather than add it. If you want speed, I recommend a frontend such as Invidious or Piped, it’s what I use on my weaker laptops where YouTube takes half a minute to load.

What is this, a callout post?

Sounds like Firefox text mode with extra steps. Granted, it might be good for other browsers, but I personally am doing fine so far with a reader plugin on Palemoon.

Also, as other users have mentioned already, it’s sus as heck.

deleted by creator

Petition SIGNED

Make all of them run a bogosort on a list of 10-100 items. Whichever one finishes last gets shot. Repeat until you no longer have idle servers