Hey yall, I want to get into self-hosting. I want to start from hosting on a raspberry pi, and I am just wondering if yall have any recommendations (I’ve never hosted anything before, but have experience in linux and programming). Sorry if it’s bit of a stupid question.
You must log in or register to comment.
Pihole is easy and light enough. I used to host Transmission (transmission-daemon) on a 3B+ and it worked alright for seeding around 300-500 torrents. FreshRSS also worked alongside.
Pihole my is choice too. It’s pretty good, but for some reason video ads still get through even off YouTube? Is it possible to block them?
uBlock Origin gets rid of every single one.
You are not wrong, but uBlock needs to be installed on each device and only works on the browser, while pihole blocks adds across the whole network for all devices.
I have pihole but still use ublock on my personal computer
I did recommend Pihole in my original reply. But there’s no way to block Youtube ads using it, as was being asked in the reply to my original reply.
Ah my bad mate, I didn’t notice you were the same person and the way you wrote your reply made me think you misunderstood the advantages of each and we’re recommending to use ublock only
You can’t do that with Pihole as the ads come from the same domains, and basically need a browser extension or an app with a built in equivalent.
If you’re in the UK though, it does block the ads on All4 which was a nice surprise. It even works for the TV app.
I am in the UK and that’s really useful to know. Thanks
YouTube ads don’t come from a separate server. They come in the same way as the video. They pretty much need to be filtered out at the player end (e.g. browser plugins).
I’m hosting https://www.home-assistant.io/ on raspberry pi’s.
I just started with HA as well and it’s a massive rabbit hole haha. So far set up thermostats for rooms, motion sensors with smart lights and integration with Frigate for my security cams. Also set up a tablet with HA which displays all our photos from the NAS as screensaver.
deleted by creator
Depending on what method you use, you would either have to change the configuration for port mapping in a file or when you run the container. It’s simple enough, and you should be able to figure it out quite easily. If not, help for Docker related stuff is never far away.
Pihole is the best starting point in my opinion, helped a lot of my friend to get started !
Goes against the spirit of self-hosting but for some stuff(Email, DNS, Passwords), I just SaaS it out. As much as I love my lab, nothing self-hosted in my prod environment is critical.
Exactly, I can barely maintain a media server I really don’t want to be responsible for my passwords and photos. There are secure alternatives that are private and open enough for my needs…
I haven’t found anything software-wise (self-hosted or SaaS) that I’m satisfied with for photos. Thankfully, those are easy enough to backup and aren’t used day-to-day. What have you tried, and do you like/dislike of each?
At first I tried some self hosted solutions but I didn’t like anything, eventually I landed on ente.io/ which I really like.
It has a lot of ways to import your photos, really nice mobile and pc (windows, Linux, and Mac) apps that can automatically upload your pictures in the background, the devs are really responsive (there was a bug with one of the importers so I opened a ticket and I got a lot of help in order to debug the issue and solve it).
The only thing that I don’t love is that while the clients are all open source, the back end isn’t because they claim they are too small of a team to keep it both open source and secure.
deleted by creator
You can change the DNS on your personal devices instead of changing it on the router.
You can make an HA cluster from 2 or 3 pies. One node goes down, the other takes over. Or go the docker swarm road.
For the cost of a rpi, just get actually capable hardware. Once you actually get anything running you’ll wish you had real hardware.
What kind of hardware, with a similar price point to the rpi, do you think of?
This reminds me of the old “build a gaming pc for less than a console” thing was popular for a while.
So let’s assume a $90 raspberry pi (someone really splurged here)
- $90: case
- $0: cpu, get used from a friend
- $0: motherboard, get used from a friend
- $0: ram, get used from a friend
- $0: power supply, steal from work
You can drop the case and just use a cardboard box, which would allow you to afford storage. I’m just going to assume you boot from a usb and keep everything in memory.
What do you think about refurbished micro-pc’s? Like this Lenovo ThinkCentre M910q Tiny (i5-6500t; 8GB RAM) for 130 euro’s?
I have a refurbished dell that I got for ~$150-$200, the cpu is an i5-8500t. I think those are great deals, would absolutely recommend them for a home server. As your needs grow, you can even replace the RAM inside later.
Agreed. I picked up the M910q for $100 including shipping from a corporate sell out on Ebay. It does everything I need; and has the ability to do so much more.
I’ve been leaning this way lately. From a cost/capability standpoint, RPis were easy to justify when they were ~$30, but not as much at their current inflated prices unless you have specific power consumption and form factor requirements. Used/refurbished Dell thin clients and MFF PCs can be had for $40-100, ranging from fanless systems with low-power Atoms and Celerons to full-fledged desktops with Core i-series CPUs, all with memory and storage included more often than not. I personally just picked up a Dell OptiPlex MFF with an i5-9500T, 8GB RAM, and 256GB SSD for $100.
honestly it is good to start with and for controlling machines like an array of 3d printers but a dumpster dive laptop will be faster. RPI4 is quite old now.
with that done:
- jellyfin
- smb server
- syncthing
- tftp with wake on lan / clonezilla to backup your other machines
jellyfin
How good is the performance of that on a rpi4? Does it work for transcoding videos?
It doesn’t. Not well. And for larger files, even on cable connection without transcoding performance is god awful, sometimes it doesn’t play, or stutters or you get awful audio desyncs. Don’t do jellyfin on rpi
it ever performs awfully slow on my secondary computer with i3 cpu.
Are you talking about 4k files? Because I have been running Jellyfin on my pi400 for the past two years and I’ve not had those issues at all. My content is 1080p max though.
Yep, 4k, sometimes with HDR. It was happening mostly on those. But 1080p files were also sometimes affected
I ran JF for about a year on a Pi 2B. Transcoding off at the server. No issues at all playing any file using Direct Play - including large 4K rips. I moved to an Odroid C2, again, absolutely no issues with playback.
If you’re seeing trouble with Direct Play I’d bank on it being network or storage related rather than the power of the Pi. E.g. the network hasn’t got enough throughput to serve the files. In Direct Play you need very little in terms of server resources as it’s handed off to the client.
Dunno, maybe it was storage. I had a SATA to USB3 drive hooked up to it. Couldn’t have been network. I got some old office PC with i3-6100 for free, hooked it up to the same cable, same router port and everything is working mostly smooth now, on similar drive but connected directly to SATA
@zpoex Nextcloud is always a handy one
Some things that haven’t been proposed here might be to use it as a nas. If you want to access your films and shows from outside it’s easier to set up Plex instead of jellyfin for now. You can use it also as a steam machine streaming from the pc to the tv, or as Kodi/Libreelec mediacenter to make your tv smart
deleted by creator
If you have a 3d printer also check out Klipper, Octopi etc. I run mine off a pi zero 2 and it is a leap in performance over the stock board on the Ender 5.
I have two Raspberry Pi (4 / 2) and I use them to selfhost:
- AdguardHome (two instances)
- HomeAssistant
- NextCloud
- Forgejo
- VaultWarden
- NTP server
Those are all as Docker services so I can easily switch to new devices in case I need to. All of them work like a charm.
If it’s a Pi3b+ - you can actually host a vanilla Minecraft server on it, with some heavy optimization to reduce memory usage and no more than 4 players online. It’s a fun experiment, however impractical.
My list for my raspberry pi 4 (4 GB):
- Nextcloud (synced cloud storage, like Dropbox; it can do more with plugins but this is all I use it for)
- FreshRSS (RSS reader)
- Wallabag (read it later, like Pocket or Instapaper)
- Gitea (git project hosting like Github; admittedly I don’t really use this one much)
One suggestion might be to load a Debian build on it and use it for docker containers. With docker containers you can do so many different things. I have a PI 4 and it does all of the following:
PiHole - For blocking ads. (Everyone should have one of these)
OpenMediaVault - For NAS
Portainers - For loading docker containers
Radarr - Downloading Movies
Sonarr - Downloading TV Shows
Tautulli - Monitors my plex server
Overseer - Allows members of my plex share to request content.
NZBGET and Real-Debrid Torrent Downloader Clients - For downloading content from usenet or real-debrid.I have one Pi4 running all of these as docker containers. Have fun!
Any chance you can point to a good tutorial for setting up these apps on the RPi?
Pihole is a good start, though I personally use my Pi 3B+ for printer server over WiFi since I have a dumb Epson printer.
PiVPN is a simple home VPN solution that’s worth exploring.
Is you are interested in smart home/home automation Home Assistant is an open source home automation platform and makes a great Pi project.
I’ve recently set up pivpn with duckdns. Are there any security related steps I should take or is the out of the box config good enough?
